Option 1 – Mounting |
| Code |
Description |
OMIT |
SAE A (2Hole)
- 82.5mm Spigot |
Q |
Square (4Bolt)
- 44.4mm Spigot |
F |
Magneto (4Hole)
- 82.5mm Spigot |
|
Option 2 – Additions |
| Code |
Description |
N |
Needle Bearings |
E |
Rear Ports - 1/2” BSPP |
|
Option 3 – Shafts |
| Code |
Description |
CO |
1” Straight Keyed |
C |
25mm Straight Keyed |
CB |
32mm Straight Keyed |
| * |
1.1/4" Straight Keyed
* Contact Office |
| * |
1" Straight Cross Hole
10.3mm Hole * Contact Office |
SH |
1” 6B Splined |
SA |
24.5mm 14T Splined |
HB |
1.1/4” 14T Splined |
K |
28.56mm 1:10 Tapered |
KB |
35mm 1:10 Tapered |
|
Option 4 – Shaft Seals |
| Code |
Description |
D |
# 150 Bar Shaft Seal |
U |
# 200 Bar Shaft Seal |
V |
# 150 Bar Viton Shaft Seal |
RS |
SPEED SENSOR
For correct coding, add RS
after above seal options |
T |
TACHO
For correct coding, add T
after above seal options |
# Refer to specifications for full
performance data. CB, HB, KB
options have lower shaft seal ratings |
|
