Specifications

The M+S Hydraulic KK Steering Columns transfer the torgue from the steering wheel of the vehicle to the HKU, HKUS or other of the same class steering units. The KK steering columns are consisted of a pipe in which is centred the control shaft.
MOUNTING
The KK steering column is hard- mounted to the steering unit by its welded flange using four screws M10 at minimal depth 10 mm fitted in the steering unit with tightenin torgue of 2 daNm.
Permissible loads on the steering column are as follows:
Max. torgue applied to the steering wheel 24 daNm
Max. bending moment 20daNm
Max. axial load 100 daNm
The steering column must be additionally supported when the lenght L exceeds 150mm.